|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NJM2650 HALL AMPLIFIER IC sGENERAL DESCRIPTION The NJM2650 is a dual hall amplifier IC for converting signals from hall sensors to digital signals. It is suitable for speed and position sensing of motor control system using DSP or micro controllers. The NJM2650 can turn off the amplifier block and bias supply of hall device at the standby. Therefore, the consumption current of the application can be reduced. sPACKAGE OUTLINE NJM2650V sFEATURES *Position Sensing Output *Chip Enable *Hall Bias Stand-By Function *Open Collector Output *Bipolar Technology *Package Outline SSOP10 sPIN CONFIGURATION 1 2 3 4 5 10 9 8 7 6 NJM2650V PIN Function 1. A +INPUT 2. A -INPUT 3. OUT1 4. HBIAS 5. GND 6. STBY 7. OUT2 8. B -INPUT 9. B +INPUT 10. V+ Ver 1.1 - 1 - NJM2650 sBLOCK DIAGRAM V+ 10 B +INPUT 9 B -INPUT 8 OUT2 7 STBY 6 V+ B ENCODER A IC/Hall bias STAND-BY 1 A +INPUT 2 A -INPUT 3 OUT1 4 HBIAS 5 GND sABSOLUTE MAXIMUM RATINGS (Ta=25C ) PARAMETER SYMBOL Maximum Supply Voltage V+ Output Voltage VOUT Output Current IOUT Hall Bias Current IOBIAS Stand-By Terminal VOUT Differential Input Voltage VID Input Voltage VIC Power Dissipation PD Operating Temperature Range Topr Storage Temperature Range Tstg Output to GND in internal diode for ESD. Output voltage is below to IC supply voltage. RATINGS 20 V+ 7 20 V+ V+ -0.3 V+-1.5 SSOP10 250 -40 +85 -50 +150 UNIT V V mA mA V V V mW C C -2- NJM2650 sELECTRICAL CHARACTERISTICS (V+=5V, VSTBY=5V, Ta=25C) Total Device PARAMETER Supply Voltage Supply Current 1 Supply Current 2 Hall Amplifier Section PARAMETER Input Offset Voltage Input Common Mode Voltage Range Input Bias Current SYMBOL TEST CONDITION V+ ICC1 RL= ICC2 VSTBY=0V MIN. 4.5 - - TYP. - 2 30 MAX. 18 4 60 UNIT V mA A SYMBOL VIO VICM IB TEST CONDITION MIN. -4.2 1.5 - TYP. - - - MAX. 4.2 3.5 600 UNIT mV V nA Hall Bias Block Section PARAMETER SYMBOL TEST CONDITION Low Level Output Voltage VOLBIAS ISINK=10mA (HBIAS Pin) Output Leak Current ILEAK(HBIAS) VOUT=5V (HBIAS Pin) Output Section PARAMETER SYMBOL TEST CONDITION ISINK=5mA Low Level Output Voltage VOL1 (OUT1,OUT2 Pin) VOL2 Output Leak Current ILEAK(OUT) VOUT=5V (OUT1,OUT2 Pin) Stand-By Section (Low Level Stand-By) PARAMETER SYMBOL Input Low Level Voltage VIL(STBY) Input High Level Voltage VIH(STBY) Input Bias Current ISTBY MIN. - - TYP. 0.1 - MAX. 0.3 5 UNIT V A MIN. - - TYP. 0.2 - MAX. 0.5 5 UNIT V A TEST CONDITION MIN. - 2.4 - TYP. - - 1 MAX. 0.4 - 20 UNIT V V A -3- NJM2650 sTYPICAL APPLICATIONS V+ STAND-BY Signal Low Level STAND-BY Micro Controller or DSP for power supply Micro Controller or DSP for I/O 22k 22k 10 9 8 7 6 V+ B ENCODER Hall Sensor A IC/Hall bias STAND-BY 1 2 3 4 5 sTIMING CHART Hall Sensor A Hall Sensor B A Phase Output B Phase Output -4- NJM2650 sTYPICAL CHARACTERISTICS 0.5 Low Level Output Voltage VOL1 ,VOL2 (V) 0.4 0.3 0.2 0.1 0 Low Level Output Voltage vs. Sink Current (OUT1,OUT2 Pin,V+=5V,Ta=25C) Low Level Output Voltage vs. Sink Current (HBIAS Pin,V+=5V,Ta=25C) 0.2 Low Level Output Voltage VOLBIAS (V) 0.15 0.1 0.05 0 0 2 4 6 8 10 0 5 10 15 20 Sink Current ISINK (mA) Supply Current 1 vs. Supply Voltage (RL=,Ta=25C) Supply Current 2 ICC2 (A) Sink Current ISINK (mA) Supply Current 2 vs. Supply Voltage (VSTBY=0V,Ta=25C) 160 3 Supply Current1 ICC1 (mA) 2.5 2 1.5 1 0.5 0 0 120 80 40 0 5 10 + 15 20 0 5 10 + 15 20 Supply Voltage V (V) Supply Current vs. Stand-By Input Voltage (V+=5V,RL=,Ta=25C) Supply Voltage V (V) 2.5 Supply Current I CC (mA) 2 1.5 1 0.5 0 0 0.5 1 1.5 2 2.5 3 Stand-By Input Voltage VSTBY (V) -5- NJM2650 sTYPICAL CHARACTERISTICS Suuply Current 1 vs. Temperature (V+=5V,RL=) Supply Current 1 ICC1 (mA) 2.5 2 1.5 1 0.5 0 -50 -25 0 25 50 75 100 125 150 Ambient Temperature Ta (C) Supply Current 2 ICC2 (A) 3 80 60 40 20 0 Supply Current 2 vs. Temperature (V+=5V,VSTBY=0V) -50 -25 0 25 50 75 100 125 150 Ambient Temperature Ta (C) Low Level Output Voltage vs. Temperature (OUT1,OUT2 Pin,V+=5V) 0.3 Low Level Output Voltage VOL1 ,VOL2 (V) 0.25 0.2 80 Low Level Output Voltage VOLBIAS (mV) -50 -25 0 25 50 75 100 125 150 Ambient Temperature Ta (C) 60 40 20 0 Low Level Output Voltage vs. Temperature (HBIAS Pin,V+=5V) 0.15 0.1 0.05 0 -50 -25 0 25 50 75 100 125 150 Ambient Temperature Ta (C) [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -6- |
Price & Availability of NJM2650 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |